Window Repairs

Window repairs can help homeowners save money and ensure their comfort. Window replacement is often required in the event of severe damage, such as broken glass or a shattered window frame.

But many other issues can be addressed to extend the lifespan of your windows. The most frequent issues are:

Cracked or Broken Panes

It's a rock that's been thrown by your lawnmower or a tree branch that has been blown by strong winds, cracked window glass isn't just visually unappealing, but also can result in more expensive electricity bills because the broken pieces allow cold air to enter your home. Fortunately, it's generally simple to repair windows with damaged panes.

Begin by carefully removing the glass using gloves and sunglasses. You may have use a utility knife to break loose the old glazing compound or putty around the frame's edges. Then, clean the glass's surface and the frame's wood with a soft cloth or paper towel.

After cleaning the area, apply a silicone caulking that is water-proof to the frame's perimeter. This prevents water from getting in through the crack, which can cause further damage to both the frame and the glass.

A crack that is severe in double-paned glass could compromise the gas between the panes, rendering your windows less insulative. If the crack is so extensive that it is threatening the structural integrity of the window, or movebkk.com if the inner pane is missing you might need to consult a professional.

Cracks caused by thermal stress can happen when there's a dramatic difference in temperatures between the inside and outside of your home, which causes the glass to expand or contract. If this happens across two parts of a window it's best to replace the glass rather than trying to repair it.

For cracked windows that aren't yet ready to be replaced, clear tape can do a decent job of stabilizing the crack and keeping out bugs and cold air. You can even cut an area of nylon stocking or tarp that's large enough to cover the crack and glue it in place with duct tape. This is not an end-to-end solution, but it's a good way to keep cold air out and insects away from your home. If you notice cracks or blemishes on the windows of your old ones, you should check with your local company to see whether replacing the entire window is a better solution.

Rotten Wood

Wood rot is a typical problem for windows. It can degrade a house's appearance and create a security danger. It is possible to repair the wood that has rotted. You will first need to address the cause of the wood's decay. Look for leaks on the roof and other places where water can enter the wood.

You will then need to take off the rotten parts of the window frame. This can be done using a claw hammer, chisel or a rasp. Once the rotten areas have been eliminated then you must replace them with new wood. Pre-treated wood is suggested for this project, as it will resist the onset of rot. If you are unable replace the wood damaged by rot, you can try using wood filler or hardener to help strengthen the damaged area. The majority of hardware stores carry this type of product. Follow the directions on the label of the product to get the most effective results.

After you have repaired the damaged areas of the window sill, it's important that you protect the area. You can do this by applying a water-resistant wood sealant. A product such as Sikkens is a great choice for this job.

Make use of a two-part epoxy to protect the wood from further damage. This product is easy-to-apply and leaves a nice finish. It is essential to follow the instructions on the label. Once the epoxy filler has dried, you are able to sand the surface of the wood. Start with a rough sandpaper, and then move on to a smoother grade.

The last thing you want to do is make the area that is rotting even more by expose it to more water. Therefore, it is recommended to cover the area that has been repaired with an oil-based primer that will help protect it from moisture. After that, you can apply the wood sealant, which is waterproof.

The W won't open

A window repair that isn't opening could be due to many factors. The house could have settled, or the wood frames may have warped in rainy weather. Someone might have also nailed them shut for security. With a bit of patience and the right tools, you can open most stuck windows.

Accumulated debris or gunk can be a major cause of windows that aren't opening. Acme Glass notes that dirt and grime accumulates over time on sliding tracks, hinges and locks. Metal hardware can also rust if it comes into contact humidity and direct sunlight. Spraying grease on these areas will help to prevent oxidation and ensure that your windows are operating properly.

Stuck windows can be the result of a loosening or breakage of the pulleys that are used to lift and lower the window. These components may lose tension and cause obstruction especially when the window is situated at least two stories above the ground.

If you have difficulty opening a door, you can use a pry-bar to gently push the upvc window repairs open. Place a wood block on the frame to give the pry bar more leverage, and be careful not to scratch the window or wood. Try applying a hairdryer along the frame's edges for a few minutes. This will warm the wood and make it easier to move.

A damaged spring can be the reason for windows that aren't able to lift or lower. You'll need to refer to the owner's manual for more information depending on who made your windows.

If you've tried cleaning the moving parts of your windows and then lubricating them but they still won't open It could be time to replace windows with energy-efficient, new windows from Homespire Windows and Doors. Don't let the windows of your home go from functional to useless. A window that isn’t properly shut could make your home vulnerable to water damage and burglary. Contact us to learn more about our replacement windows and services today!