Double Glazed Window Repair

The majority of double-glazed windows come with a warranty, and it's important to know the scope of this warranty. In general, it covers issues with the hardware of the window including hinges and locking mechanisms - in the first 10 years.

A crack in the seal can be the reason for uPVC window repair mist appearing between your glass windows. This issue must be fixed immediately to avoid mould or damp forming within your home.

Condensation Between the Windows

If condensation forms between windows in your home, it is an indicator that the seal holding the insulating gas between the panes has failed. This is a serious problem that needs to be addressed immediately, especially during the winter months when humidity levels are at their highest. It could also lead to damage to the sills and sealant, and even mildew or mould.

Double-glazed windows shouldn't have condensation between the panes. However, it's not uncommon to have high humidity or an extremely cold snap to trigger this problem. The issue can usually be resolved without the need to replace the entire window. A professional can drill tiny holes into the window and spray special cleaning solution inside. The water is then drained from the window. Additionally, an anti-fogger can be installed to prevent future moisture buildup.

Condensation between the windows can also occur due to air leakage or other factors outside of the window. If this is the scenario, it's likely to take longer for moisture to collect in the window, as the air has to be warm enough for the water molecules to evaporate. In these cases it is recommended to replace the double-glazed windows rather than repair the seals on the existing units.

Double-glazed glass windows are composed of two or more pieces of tempered insulated glass, which are joined by a metal framework. The space between the windows is filled with an insulating gas, such as Krypton or argon, and then sealed. The seal stops the insulating gases from escaping and also stops moisture and air from entering the gap.

As the windows age, the seals weaken and let moisture in the gaps between the glass panes. When seals fail it is crucial to recognize this as it means that the double glazing no longer performs as well as before. This can result in poor energy efficiency, increased heating bills, damage to the property and the risk of condensation between the windows.

Mist

If you have condensation on the outside of your windows this is perfectly normal and indicates that your double glazing is in good working order and retaining the heat inside your home. The condensation happens because the outside air is hotter than the glass, and then reaches the dew point of the window earlier than the air inside. This is among the many advantages of having high quality double glazing.

If the condensation is located on the inside of your window, it could be a sign of a ventilation problem in your home. This is because the excess moisture isn't going anywhere and is deposited on your window or in carpets, furniture and other areas within your home. It is possible to prevent this by having it inspected by a professional and ensuring that there is enough fresh air inside your home.

The other reason you might get mist on your double glazed window is that the seal between the two panes is breaking down. This can be caused by wear and tear, or through the use of chemical cleaning solutions. The best thing to do is get the windows fixed as soon as you can.

Professionally repairing your windows will ensure they remain fog-free, free of condensation and free of misting. It's also less expensive than replacing them all the way through and it will reduce your energy bills.

A FENSA certified window installer can provide you with a cost estimate for the repair upvc windows or replacement of your double glazed windows. Upgrade your old windows to energy efficient ones that are A-rated if they are very old.

It is recommended to keep copies of any agreements and warranties with the window installers. It will be useful if you experience any problems with your windows. You can contact your window fitters and resolve the issue. This is better to ignore the issue which could cause additional problems in your home.

Open or close with difficulty

It's not just annoying when double-glazed windows are hard to open or close. They could cause more expensive energy bills due to the loss of heat and drafts. It can also pose security risk, particularly if the locks don't work properly. It is recommended to fix double-glazed doors and windows as soon as you can.

If you have attempted to open your window using one of the easiest methods, such as using an electric screwdriver or tapping the frame with a solid object, the problem could be more serious. The window may have moved and requires a reset or there could be a gap between the glass and frames. In either of these scenarios, you must seek out an experienced double glazing repair expert to make sure that the right repairs are made to prevent any further problems.

It's not uncommon to find UPVC window handles and lock mechanisms to get stuck or difficult to operate particularly when they're worn out and worn. This is due to the accumulation of dirt or grease within the handle. It can be resolved by cleaning it using a upvc window repairs near me cleaner. If this doesn't work, try tapping the uPVC using the help of a screwdriver. Be careful not to harm the handle or window handle mechanism.

If this doesn't resolve the problem then the window may have to be replaced, as it is likely that the hinges aren't more in the proper position, or the locking mechanisms are damaged. In this instance, you must contact a specialist UPVC window repair expert.

David The Window Wizard specialises in all technical aspects of double-glazed repair of doors and windows, including fixing a jammed or shut double glazing window. He has extensive experience with converting discontinued window mechanisms to modern ones and often can save you the expense of replacing the entire window. For more information or to book a free quote call or email us today.

Warping

Double glazed windows are often the best option for saving energy in your home. They are made up of two separate panes which have a spacer, or dense gas between them. This creates a seal which keeps cold air out and warm air inside. However with time, windows can become damaged or broken and require repair. Luckily, most of these repairs are simple and can be completed without the expense of replacing the entire window.

One of the most common issues double-glazed windows encounter is warping. The windows begin to bow or upvc window repair twist, or bow. This can affect the structural integrity and insulation abilities of the window. The best way to prevent this problem is to ensure that your double glazed windows are fitted properly and maintained regularly.

If your double-glazed windows are beginning to swell, it's crucial to get in touch with a specialist immediately to help prevent the problem from getting worse. They will be able inspect your windows to identify the root cause. They will then utilize specific tools to correct the issue and make sure that your windows are sealed again.

The most common cause of this issue is the presence of water vapour between the windows, which can build up over time. This can be caused a number of different factors like weather conditions, humidity and temperature fluctuations. To address this issue, the specialist will drill a tiny hole to release moisture. The specialist will apply a cleaner on the glass to clean it, then apply an adhesive.

In the alternative, if your windows aren't able to be closed or opened, this could be a sign of a break in the mechanism or hinges. It is worth trying to lubricate these parts of the window before calling a professional as this can often solve the issue and decrease the need for replacements. If your windows are very old or don't provide the insulation you would like to see, it is often better to replace them.