Repairs to uPVC Windows

uPVC windows are a great choice for modern homes. They are easy to maintain and durable, as well as long-lasting. They are not susceptible to rot or rust like aluminum and timber.

It is essential to clean and oil UPVC windows and doors regularly. This will save you from costly repairs and increase energy efficiency.

1. Broken Glass

The broken glass in your windows can cause serious damage to your home and may even be fatal. It is essential to ensure that your windows are in good working order.

Single-pane windows are relatively easy to replace and typically fit into frames of the past easily. If windows with double panes are held together by internal beading, it is difficult to remove and replace the panes that were previously in use. In this situation you'll need to locate some plastic spacers that aid the new pane in being able to fit correctly into the frame of the window.

If you plan attempt to remove the window panes yourself it is important to wear appropriate safety gear such as gloves that are thick and protective eyewear. It is also recommended to lay down a drop cloth before you begin working on the window panes so that any shards of glass fall onto the fabric and not onto the floor window Doctor which could cause them to be trampled.

Once the glass has been removed from the window, it's best to cover the gap with packaging tape or duct tape to stop water and drafts from entering the property until a professional is able to come out and fix the window. It also acts as an obstacle to stop intruders from getting into your home. If the gap is large, you may think about the security door with an integrated window, as it offers the best of both worlds.

2. Sagging

uPVC is a durable energy-efficient, cost-effective and economical alternative to timber sash window. However, with time, they can suffer from a variety of problems including sliding. A sagging uPVC window could cause issues with light, draughts and even security. If you notice that your uPVC window is beginning to sag it's crucial to act fast to prevent the problem from getting worse.

To repair a window that is sagging, you can try repositioning the hinges. To accomplish this, you'll need to open the window to get to the frame. After that, using an screwdriver, remove the hinges at the top and bottom and adjust them by turning them clockwise or anti-clockwise. Close your window to test the fit after having moved your hinges. If you're happy with the fit, you can tighten the screws to ensure they remain in place.

If you can't reposition the hinges, you may need to replace the seal. Over time rubber seals can lose their elasticity and become dry which causes them to lose tightness. It is crucial to replace your seal as quickly as you can in order to keep your uPVC window watertight and draughtproof.

uPVC handles could also loosen. This is often caused by screws that have loosened over time, but it can be caused by the handle mechanism wears out. Fortunately, it's easy to repair the loose uPVC window handle yourself. First, you'll need to close the window and do a test fitting. The joint at the corners of the sash must align with the joint on the casing. If it isn't, you can use a screwdriver to loosen the handle, and then return the mechanism to its original position.

3. Water Leaks

It is essential to take action if wake up every morning to discover mouldy walls and floors that are wet. The leaks of water from windows do are not just a cause for degradation of your home's structure but also hinder your efforts to control the temperature in your home. Most often, uPVC window replacement leaks are caused by a damaged or missing sealant.

This is a relatively easy fix that can be completed by any competent DIYer. Based on the severity of the problem the old caulking may require removal before a fresh layer is applied. It is crucial to remember that when it is about uPVC window repairs, you should avoid the temptation to "over-caulk' as this will only make the area more difficult to clean and decrease the efficiency of your energy usage.

It is crucial to make sure that any drainage holes are clear of debris and that the sill pan is angled in a way that allows it to drain away from the window. In more serious cases you may need to think about replacing the window.

Mold spots and rotten sills are also signs of water leakage. The mold thrives in damp environments and is able to quickly spread throughout the house.

If the leakage is occurring between the double glazing-glazed Window doctor, it is more likely the problem is with the seal rather than the frame. This can be easily fixed by a uPVC window specialist who can replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

Hinges may be to blame when your uPVC window is difficult to open, or if it blows open with the breeze. Anyone with the skills to fix them can replace the hinges in a matter of minutes.

Most households in the UK will have either top hung or side hung uPVC windows that use hinges and like any mechanical part they can wear down over time. It is essentially a simple procedure, but it is easier to do when you have a person to help hold the frame in place.

It is also important to ensure that the uPVC hinges are opening and closed in the correct direction. Look for the arrows that are on each hinge to determine which way the window should be opened.

Window hinges that aren't working properly could be caused by improperly opening the window a certain way or by poor installation at the factory. This issue can be fixed by sending us a picture via our website and we will be happy to give you advice.

It is also crucial to grease the hinges on a regular basis. Applying an engineering lubricant that is light to the hinges is an ideal method of doing this. We recommend using an oil that does not contain solvents, such as 3-in-1 Multi-Purpose oil. Regularly lubrication will help the window to operate and close more smoothly. It can also reduce the possibility of a window sticking and help prevent corrosion. It is recommended to do this once a year. WD40 and other solvent-based lubricants are not recommended as they could damage parts of your uPVC window.

5. Draughts

Draughts can be caused by several different causes. First, the hinges because of wear and tear, could become misaligned. This causes gaps to develop where the sash meets the frame. If they're beyond repair, it may be necessary to have them realigned. In addition, the interlock could also become misaligned. This is located on the hinge's side, and might require to be cleaned. In some cases it might be necessary to replace them.

These seals are susceptible to wear and tear or be damaged over time, allowing air escape. This can be avoided by replacing them with high-quality weatherstripping. Another option is to replace the upvc window with glass that is low-emissivity, this will help in regulating indoor temperatures and again will reduce the possibility of draughts.

The last way to reduce drafts effectively is to use a Draught-exclusion device. These are typically fabric tubes filled with a filler that can be put on top of your window sill. They can keep your home warm by blocking out cold air.

Your windows made of upvc will remain a great source of insulation and security in your home with a little regular maintenance and repairs. It is essential to remember that all windows eventually become worn out, and it may be cheaper to replace them instead of fixing them. If you have any problems with your upvc window it is recommended to speak with a professional as soon as possible.